Worm Micro Gearmotors

Worm gearboxes	CM026	CM030
Ratio i	5:60	5:100
Torque [Nm]	9-12	11-18

The high degree of modularity is a design feature of the new CM wormgearboxes range thanks to a wide selection of input and output kits.
Main features of CM range are:

• Die-cast aluminum housing without plugs
• Permanent synthetic oil long life lubrification
• 2RZ bearings on the worm shaft
• Input polyacrilic oil seal

These features ensure that the gerabox is well lubrificated and exclude any possibilities of leakages. They also significantly improve the efficiency of the gerabox.

The distinguishing features of EC series D.C. motors in general are their high start torque, which enables them to overcome heavy loads at start-up, as well as a torque/speed ratio suitable for high work loads and to absorb the kickbacks of a variable load. Another important characteristic of the D.C. motor is its density i.e. considerable power and torques are concentrated within a compact size compared to other types of electric motors.
Features:

• Magnetic field generated by permanent magnets
• Available in 2 sizes: diameter 65, 80 mm
• Low voltage power supply, 12 or 24 Vdc
• Power ratings available from 100 W S2 to 250 W S2

The brushless dc motors BL series are manufactured on 2 sizes with torque from 0,12 Nm to 0,43 Nm, and can be controlled by integrated driver or by external driver. The benefit using a BLDC motor than a DC motor is as follows:

• Very long life
• High efficiency
• Electronic commutation and motor control by digital sensors (encoder, resolver and so on ..)
• Wide speed range
• Maintenance free

The BL motors series have a compact design and thanks to low moment of inertia they give high dynamic performance, and also are low cost solution because use Hall sensors feedback (instead encoder or resolver).
The 3 phase windings of the motor are low voltage 24V and so offer great safe on the equipment, mainly where the operator should have direct contact with it.
Besides if you use the integrated speed controller solution, you can simplify the cabling of equipment, reducing and safe space inside electric cabinet too.

Intecno micro gearmotors are perfect for many applications, in any sector where both small dimensions and good performances are required. These characteristics are important in the medical sector, robotics also in electric vehicles and automatic doors.